About JEALIFILL® cross-linked Dermal filler
√ The whole range of JEALIFLL® dermal fillers are produced by AESRHEA LABORATORIES LONDON who keeps on pursuing the highest quality, nature -looking effect and best service with well selected components and AESCROSS technology manufacturing procedures.
√ AESCROSS technology is exclusively designed, tested and followed the tracks by AESRHEA LABORATORIES LONDON, this technology rejuvenates the skin, creates a dewy skin condition and augments nose, lips, nasolabial folds, cheek, jawbone and chin perfectly.
The skin conditions alwayschanges due to the ageing and environment factors, and those could cause the skin moisture loss and appearance of fine lines and wrinkles. Our main component, hyaluronic acid could help to hydrate
the skin, maintain the skin firmness and elasticity and adjust the sagging dermal.
| Type |
JEALIFILL®
1ml Deep |
| Certificate |
CE 2764
certificate |
| Composition |
20 mg/ml cross-linked sodium hyaluronate gel |
| Approximate number of gel particles 1ml |
100,000 |
| Injection areas |
It can be injected on the treatment of fine wrinkles on face such as lip lines, frown lines, crow's feet, forehead lines. It also can fill the hollow area of under eyes and give volume to the lips. |
| Where to inject |
Dermis |
| Volume of syringe |
1ml |
| Needle size |
2pcs *27G |
| Duration |
12-16months |
| Storage |
2-25ºC |
JEALIFL® Dermal fillers are sterile, viscoelastic, biphasic, BDDE free and biofermentation, with 20mg/ml concentration. Natura, Deep, Ultra Deep and Volume are four different ranges of JEALIFLL® which can adapted to different part of facial. Natura is especially for fine lines of face, hands and neck.
√ Deep could achieve a nature looking effect of lips augmentation, reduce the middle lines around lips, neck, eyes
and hands.
√ Ultra Deep helps to improve the nasolabial folds, augment the forehead and facial deep wrinkles. As for the Volume, which is the largest particle size so it has perfect effects on cheek, jawbone, nose, and deep nasolabial folds augmentation.
JEALIFILL ® Range
QUESTIONS & ANSWERS
√ How Is It Made?
JEALIFILL® dermal fillers are manufactured by AESRHEA LABORATORIES LONDON using the AESCROSS technology. When they are injected to our skin, it will show perfect viscoelasticity effect and delay the degradation time,
which is due to our manufacturing process could optimise the cross-linking and hyaluronic acid molecular chains.
√ Does It Need A Skin Assessment Before Treatment?
No, a skin assessment is not required before treatment.
√ ls It Temporary Or Permanent?
Treatment with JEALIFILL® dermal fillers are not permanent. The hyaluronic acid will be completely degrade over
several months.
√ Duration Of Effect
The manufacturer llustrates that depending on the JEALIFILL® different references, the treated area, different skin
types, the results can last for several months, up to a year.
JEALIFILL® dermal fillers are expected to last between 6 to 9 months and JEALIFILL® Volume exists between 9 to 12 months.
√ Certification
CE Marked Class Il Medical Device.
√ Should Be Used By
Treatment with JEALIFILL® dermal fillers should only be performed by trained medical professionals, such as doctors, dentists and nurses.
√ Not To Be Used In
There are some people that are not suitable for treatment with JEALIFILL® Products. If you meet any of the
following criterion, we'd suggest you can not be suitable to use them:
- Patients who are under 18 years old.
- Female who are pregnant or breastfeeding.
- Who has a history of auto-immune disease, or who are receiving immune
therapyrecently.
- Who has a tendency to develop hypertrophic scars.
- Who is hypersensitive to hyaluronic acid.
- The part that you'd like to have injected is currently injured, inflamed or infected. - The part that you'd like to have treated still with other implants.
√ Reported Side Effects
Performed by a fine needle would help to release the pain during the treatment. Also to apply some anaesthetic cream on the treated area before the injection could help to minimise the discomfort. To relief the pain, patients could ask their practitioner to use the filler and Volume with added lidocaine.
Inflammatory reaction to JEALIFILL® dermal fillers have been observed with swelling, redness, tenderness, induration and rarely acneform papules at the injection area after the initial treatment. Average duration of those effects is no more than 2 weeks. You can apply a cold compress or ice pack for a short time on the treated area. You should
avoid anti- inflammatory and anti- coagulant medications in one week before your treatment so that the risk of bleeding or bruising and tenderness at the injection sites could be reduced.
But with the high quality and safety of JEALIFILL® dermal filler, it rarely happens serious side effects. Allergic reactions are rare as hyaluronic acid is a compound that is naturally in the body. If you have other serious side effects, the side effects can not be reduced or even goes to be more serious, contact your practitioner to review your treated area as soon as possible.
The aftercare suggestions should be given from your practitioner. But to avoid exposure the treated skin from sun and hot temperature for one week which are needed.
Additionally, the treated area should not apply any make -ups for at least 24 hours after the performance.
CE, ISO 13485 CERTIFICATE.
AOMA CO.,LTD import the F-D-A & Europe EDQM approved raw material of Medical Sodium Hyaluronate Gel which costs around 45,000USD/ kg from USA. is the earliest product in China that has obtained dual certification of CE and international GMP certification.
More than 4 million people worldwide have been used AOMA CO.,LTD products so far. 96% of customers buy again after tried AOMA CO.,LTD products.
Package:
1, One syringe and two needles in a PVC blister. One blister and instruction in a retail box.
2, Ten Pieces of products delivered in a white box.
3, One hundred pieces of products delivered in a hard carton.
Out packing specification(1piece): 50*40*28cm
4, Two hundred pieces of products delivered in a hard carton.
Out packing specification(1piece): 58*45*47cm
middle box(10pieces)specification: 34*33*10cm
Shipping:
by air, delivery will be made within 2 working days after payment.
Storage:
Store at 2-30ºC. do not freeze. Protect from light source.
Do not use after the Expiration date.
Store for two years.
Payment Term:
TT(wire transfer), Western Union, credit card and Paypal on Alibaba Trade Assurance
Feedback from our clients
About AOMA CO.,LTD
1, Main products
Our product lines include Cross-linked dermal filler; bo- tox(50iu, 100iu, 150iu); Mesotherapy solution from skin rejuvenation, skin Whitening, Fat dissolving injection, Hair growth injection,etc.
2, Trademark
Our trade mark are OTESALY and SOMED, which are registered in Russia in USA, Europe, Russia, Kazakhstan, Iraq, Brazil, Mexico, Colombia,etc.
3, 16 Years History
Aoma CO.,LTD was established in 2005, covers an area of 4,800 square meters of factory, 3 production lines, started export medical products since 2006.
We are verified supplier on Alibaba for more than 10 years with good reputation.
4, GMP workshop
Our factory covers an area of 4,800 square meters, founded with 800 square meters 10,000 class purification workshop and 300 square meters 100 class purification workshop. The production area is about 3,200 square meters. we have a terminal sterilization technology and strict quality control system,The sodium hyaluronate gel is sterilized by high pressure steam,and the needle is sterilized by gamma rays.The preparation is aseptic and pyrogen-free,which ensure the safety and high quality of the products without pollution.
5, Top production equipment
We have the most advanced production equipment imported from Europe countries,such as Automatic vacuum filling and stoppering machine from Germany OPTIMA, two-door cabinet type sterilizer from Sweden GETINGE, Agilent HPLC, UV, Shimadzu GC, Malvern rheometer, etc.
6, Strict clinical test
We entered the clinical test from 2006, and cooperates with medical institutions such as The First Affiliated Hospital of Zhejiang University, Shanghai Ninth People's Hospital,etc. The results show that our cross-linked sodium hyaluronate gel for plastic surgery can meet the clinical needs,the quality of the prepared products is stable, the filling effect is good, the maintenance time is long, and the rate of adverse reactions is low.
7, CE, ISO 13485 CERTIFICATE.
AOMA CO.,LTD import the F-D-A & Europe EDQM approved raw material of Medical Sodium Hyaluronate Gel which costs around 45,000USD/ kg from USA. is the earliest product in China that has obtained dual certification of CE and international GMP certification. More than 4 million people worldwide have been used AOMA CO.,LTD products so far. 96% of customers buy again after tried AOMA CO.,LTD products.
Audited Supplier 
){kind=link}
){kind=link}